Petchoa: Indoor Sow and Potted Plant
What is a Petchoa:
Petchoa is a cross between a petunia and calibrachoa. It is a semi trailing annual. Petchoa plant features the best characteristics of both plants
How to Sow and Plant
Petchoa may be started from seed sown early indoors and transplanted outside after frost, or from potted plants.
Sowing Seed Indoors:
- Sow indoors 8 weeks before the last frost using a seed starting kit
- Sow seeds thinly and barely press into seed starting formula as seeds benefit from light to germinate. Pelleted seed should be misted to dissolve the coating.
- Keep the soil moist at 70-75 degrees
- Seedlings emerge in 10-14 days
- As soon as seedlings emerge, provide plenty of light on a sunny windowsill or grow seedlings 3-4 inches beneath fluorescent plant lights turned on 16 hours per day, off for 8 hours at night. Raise the lights as the plants grow taller. Incandescent bulbs will not work for this process because they will get too hot. Most plants require a dark period to grow, do not leave lights on for 24 hours.
- Thin to one seedling per cell when they have two sets of leaves.
- Seedlings do not need much fertilizer, feed when they are 3-4 weeks old using a starter solution (half strength of a complete indoor houseplant food) according to manufacturer’s directions.
- Transplant hardened-off seedlings to the garden after all danger of the frost.
- Before planting in the garden, seedling plants need to be “hardened off”. Accustom young plants to outdoor conditions by moving them to a sheltered place outside for a week. Be sure to protect them from wind and hot sun at first. If frost threatens at night, cover or bring containers indoors, then take them out again in the morning. This hardening off process toughens the plant’s cell structure and reduces transplant shock and scalding.
Planting Potted Plants in the Garden:
- Select a location in full sun to light shade with good rich moist organic soil. Calibrachoa prefer a pH of 5.5 to 6.0
- Prepare the bed by turning the soil under to a depth of 8 inches. Level with a rake to remove clumps of grass and stones.
- Most plants respond well to soils amended with organic matter. Compost is a wonderful form of organic matter with a good balance of nutrients and an ideal pH level, it can be added to your planting area at any time. If compost is not available, top dress the soil after planting with 1-2 inches of organic mulch, which will begin to breakdown into compost. After the growing season, a soil test will indicate what soil amendments are needed for the following season.
- Plants should stand 6 to 12 inches apart in the garden.
- Dig a hole for each plant large enough to amply accommodate the root ball.
- Set level with the surrounding soil. Fill with soil to the top of the root ball. Press soil down firmly with your hand leaving a slight depression around the plant to hold water.
- Water thoroughly, so that a puddle forms in the saucer you have created. This settles the plants in, drives out air pockets and results in good root-to-soil contact.
- Use the plant tag as a location marker.
- Water thoroughly, so that a puddle forms in the saucer you have created. This settles the plants in, drives out air pockets and results in good root-to-soil contact.
How to Grow
- Keep weeds under control during the growing season. Weeds compete with plants for water, space and nutrients, so control them by either cultivating often or use a mulch to prevent their seeds from germinating.
- Mulches also help retain soil moisture and maintain even soil temperatures. For annuals an organic mulch of shredded leaves lends a natural look to the bed and will improve the soil as it breaks down in time. Always keep mulches off a plant’s stems to prevent possible rot.
- Keep plants well-watered during the growing season, especially during dry spells. Plants need about 1 inch of rain per week during the growing season. Use a rain gauge to check to see if you need to add water. It's best to water with a drip or trickle system that delivers water at low pressure at the soil level. If you water with overhead sprinklers, water early in the day so the foliage has time to dry off before evening, to minimize disease problems. Keep the soil moist but not saturated. Do not over-water as calibrachoa plants are sensitive to wet soil.
- Until plants become established, some protection from extreme winds and direct, hot sunlight may be necessary. Good air movement is also important.
- After new growth appears, a light fertilizer may be applied. Keep granular fertilizers away from the plant crown and foliage to avoid burn injury. Use low rates of a slow release fertilizer such as Flower-tone, as higher rates may encourage root rots.
- Monitor for pests and diseases. Check with your local Cooperative Extension Service for pest controls recommended for your area.
- Remove plants after they are killed by frost in fall to avoid disease issues the following year.
Growing Tips
- Cut scraggly petchoa plants back by half in late summer to spur growth and encourage new flowers.
- Petchoa makes beautiful edging plants and also can be combined with other summer-blooming annuals in mixed plantings. They are superb in containers of all sizes and types, either alone or combined with other flowers.
Common Disease Problems
Aster Yellows: Plants are stunted, develop witch's brooms (excessive growth), petals turn green and become deformed. This virus-like condition is spread by leafhoppers. Burpee Recommends: Remove infected plants and control leafhoppers. Remove weeds in the area which serve as alternate hosts to the disease.
Botrytis: This fungus causes a grey mold on flowers, leaves, stems and buds. It thrives in cool wet weather conditions. Burpee Recommends: Remove affected plant parts, avoid watering at night and getting water on the plant when watering. Make sure plants have good air circulation. Contact your Cooperative Extension Service for fungicide recommendations.
Damping Off: This is one of the most common problems when starting plants from seed. The seedling emerges and appears healthy; then it suddenly wilts and dies for no obvious reason. Damping off is caused by a fungus that is active when there is abundant moisture and soils and air temperatures are above 68 degrees F. Typically, this indicates that the soil is too wet or contains high amounts of nitrogen fertilizer. Burpee Recommends: Keep seedlings moist but do not overwater; avoid over-fertilizing your seedlings; thin out seedlings to avoid overcrowding; make sure the plants are getting good air circulation; if you plant in containers, thoroughly wash them in soapy water and rinse in a ten per cent bleach solution after use.
Fasciation: Fasciation is an abnormal flatting of stems, which may cause them to have a fused appearance. Distortion often develops at the base of the plant. It is usually caused by a bacteria or virus and enters through a wound in the plant. Burpee Recommends: Be very careful when handling plants. Remove and destroy any plants that show signs of the disease.
Powdery Mildew: This fungus disease occurs on the top of the leaves in humid weather conditions. The leaves appear to have a whitish or greyish surface and may curl. Burpee Recommends: Avoid powdery mildew by providing good air circulation for the plants by good spacing and pruning. Contact your Cooperative Extension Service for fungicide recommendations.
Common Pest and Cultural Problems
Aphids: Greenish, red, black or peach colored sucking insects can spread disease as they feed on the undersides of leaves. They leave a sticky residue on foliage that attracts ants. Burpee Recommends: Introduce or attract natural predators into your garden such as lady beetles and wasps who feed on aphids. You can also wash them off with a strong spray, or use an insecticidal soap.
Cyclamen Mite: These mites damage plants by sucking juice from stems and leaves. They multiply rapidity in hot, dry weather. They can only be seen using a magnifying glass. Plants will look distorted and stunted, and may not bloom. Flowers will be distorted, streaked and blotched. Leaves can become cupped, curled, dwarfed and thickened. Burpee Recommends: Discard plants that are severely infested. Avoid working with infested plants. Keep plants watered in dry weather. For heavy infestations consult your Cooperative Extension Service for insecticide recommendations.
Leafhoppers: Leafhoppers cause injury to leaves and stunt growth. They also spread disease. Burpee Recommends: Remove plant debris. Use insecticidal soaps. Consult your Cooperative Extension Service for other insecticide recommendations.
Spider mites: These tiny spider-like pests are about the size of a grain of pepper. They may be red, black, brown or yellow. They suck on the plant juices removing chlorophyll and injecting toxins which cause white dots on the foliage. There is often webbing visible on the plant. They cause the foliage to turn yellow and become dry and stippled. They multiply quickly and thrive in dry conditions. Burpee Recommends: Spider mites may be controlled with a forceful spray every other day. Try hot pepper wax or insecticidal soap. Check with your Cooperative Extension Service for miticide recommendations.
Thrips: Thrips are tiny needle-thin insects that are black or straw colored. They suck the juices of plants and attack flower petals, leaves and stems. The plant will have a stippling, discolored flecking or silvering of the leaf surface. Thrips can spread many diseases from plant to plant. Burpee Recommends: Many thrips may be repelled by sheets of aluminum foil spread between rows of plants. Remove weeds from the bed and remove debris from the bed after frost. Check with your Cooperative Extension Service for pest controls.
Petchoa FAQs
Is Petchoa self cleaning? Yes Petchoa is self cleaning, there is no need to deadhead
Does Petchoa tolerate frost? Yes Petchoa tolerates frost but not a freeze
What do petchoa attract to the garden? Petchoa attract: Hummingbirds, butterflies, bees as well as other beneficial insects.
How many petchoa do I need for a 12-inch hanging basket? 2-3 plants will fill a 12-inch basket.